Sennheiser 2015 Two-Way Radio User Manual


 
62
Indications and displays on the receiver
Battery status indication
The 4-step battery status display
on the display panel and the red LED
provide information on the capacity of the BA 2015 battery pack or the bat-
teries:
Warning indication for missing RF signal
The red LED
lights up constantly when no RF signal is being received, e.g.
because the microphone of the transmitter is muted.
Audio signal indication
The green LED
lights up when an audio signal of sufficient strength (e.g.
the voice of the speaker) is being received.
Alphanumeric display
After switching on the receiver, the alphanumeric display
first displays
the name of the receiver. After approx. three seconds, the standard display
appears, indicating the channel bank (1) and the channel (01).
3 segments: capacity approx. 100 %
2 segments: capacity approx. 70 %
1 segment: capacity approx. 30 %
Battery status display
and red LED flashing:
LOW BAT (you should immediately
replace the battery pack or the batteries)