Filter
Top Products
– 49 –
Automatic Hold
While on an outside call, pressing a line key, route key or a flashing
CALL
key will automatically put your call on hold and connect you to
the next call. This feature can be turned on or off at your keyset.
1. While on-hook, press the
TRSF
key and dial 110.
2. Dial 001 to turn Automatic Hold on or 000 to turn it off. (Or use
the soft keys and
VOLUME
Up/Down keys to select.)
3. Press the
TRSF
key to store your selection.
Headset Operation
You can switch between headset mode and handset mode easily.
When using headset mode, you press the
ANS/RLS
key to answer and
release calls.
1. While on-hook, press the
TRSF
key and dial 110.
2. Dial 021 to use the headset [Headset Use: On] or 020 to use the
handset [Headset Use: Off]. (Or use the soft keys and
VOLUME
Up/Down keys to select.)
3. Press the
TRSF
key to store your selection.
Note: When you are in headset mode, your speakerphone is disabled and the
ANS/RLS
key will light steady.
Hot Keypad
Your keyset’s keypad can be made “live” or “hot” so that it is not
necessary to lift the handset or press the
SPEAKER
key before you
begin dialling. Calls can be made and features activated by simply
dialling the line number, trunk group access code, internal number or
feature access code. To activate this feature:
1. While on-hook, press the
TRSF
key and dial 110.
2. Dial 031 to turn the Hot Keypad on or 030 to turn it off. (Or use
the soft keys and
VOLUME
Up/Down keys to select.)
3. Press the
TRSF
key to store your selection.