Filter
Top Products
– 11 –
Outside Calls
Making An Outside Call
1. Lift the handset and press an idle outside line key, line group key
or dial a line access code to receive dial tone.
OR
To use the speakerphone, press an idle outside line key or line
group key, or dial a line access code, to receive dial tone through
the speaker.
OR
Press the
SPEAKER
key, receive internal dial tone and dial a line
access code.
2. Dial the telephone number.
3. Finish the call by replacing the handset or pressing the
ANS/RLS
key.
Note: You will receive No More Calls tone when you attempt to make a call and
there is no key available for that line.
•
••
•
If Least Cost Routing (LCR) is enabled on your phone system,
there may be a key labelled
LCR
or it may be selected by dialling
the access code (e.g. ‘9’) which is set during system installation.
•
••
•
If your system is programmed to require an authorisation code
before you can make a call, dial * plus a valid code before select-
ing a C.O. line.
•
••
•
If your system is programmed to require an account code before
you can make a call, press the
ACCT
key, or dial 47, followed by a
valid account code. Press the
ACCT
key or the
ACCT
soft key and
then select a
C.O
line.
For more information on authorisation and account codes, see your
system administrator.