Filter
Top Products
Samsung DCS Keyset User Guide
– 14 –
Internal Calls
Calling Other Extensions
1. Dial the extension number or group number.
2. Wait for the party to answer. If you hear a brief tone burst instead
of ringback tone, the extension you called is set for Voice An-
nounce or Auto Answer. Begin speaking immediately after the
tone.
3. Finish the call by replacing the handset or pressing the
ANS/RLS
key.
Note:
• If you have a
DSS
key assigned to an extension or a extension group, you can
press this key instead of dialling the number.
• If the Hot Keypad feature has been turned off, you must first lift the handset or
press the
SPEAKER
key before you begin dialling.
Answering Internal Calls
Your keyset can answer internal calls in one of three modes: Ring,
Voice Announce and Auto Answer. Ring mode is the normal mode,
unless you change it to another mode.
Ring Mode
1. When your keyset rings, simply lift the handset
OR
Press the
ANS/RLS
key to be connected to the calling extension.
2. Finish the call by replacing the handset or pressing the
ANS/RLS
key.
See Ring Preference under Customising Your Keyset.