Filter
Top Products
– 27 –
Dialling Features
Some dialling features can be accessed using programmable keys or
feature access codes only. Others can be accessed using programma-
ble keys, feature access codes, or the soft key menus on the
LCD
. Use
of the soft key menus is described at the beginning of this guide (see
Things You Should Know).
Speed Dialling
You can dial a pre-programmed telephone number stored in the sys-
tem-wide speed dial list of numbers (see note, below) or from your
personal list of speed dial numbers (see Programming Personal
Speed Dial Numbers, below).
1. While on-hook, press the
MEMORY
key if available.
OR
Press the
SPD
key (if assigned)
OR
Dial 16.
2. Dial the desired speed dial number.
The telephone number is automatically dialled for you.
Note:
• System speed dial numbers for each system type are: DCS and Compact II=
500–999; 816=500–799; 408/408i=500–699.
• If the Hot Keypad feature has been turned off, you must first lift the handset or
press the
SPEAKER
key before you begin dialling.