Filter
Top Products
Samsung DCS Keyset User Guide
– 46 –
Receiving OHVA Calls
If you receive an off-hook voice announcement, you will hear the an-
nouncement in the handset receiver or over the keyset speaker while
you are talking on your current call.
•
••
•
Press the flashing
CALL
key on your keyset. This will place the
current call on hold and allow you to talk to the announcing
party.
•
••
•
To return to your original call, press the key corresponding to
your original call. This will disconnect the OHVA call.
OHVA Block
Your keyset can be programmed with an
OHVA BLOCK (OHBLK)
key.
Pressing this key will prevent anyone from making an OHVA call to
you until you press the key again and cancel the blocking.
OHVA Reject
Your keyset can be programmed with an
OHVA REJECT (REJECT)
key. Pressing this key while receiving an OHVA call will disconnect
the voice announcing party and return you to your original call.
In/Out of Group
If your keyset is assigned to a station ring group, you can remove
your keyset from the group. While you are out of the group, you can
receive calls to your extension number but not calls to the group
number.
If you have an
IG
(or
IN/OUT
) key programmed:
•
••
•
Press the
IN/OUT
key. It will light red when your keyset is in the
group.
•
••
•
Press the
IN/OUT
key again to exit the group and turn the light
off.