Filter
Top Products
Samsung DCS Keyset User Guide
– 42 –
3. Dial the time you want the alarm to sound. Enter the time as
HHMM
(hours and minutes) using a 24-hour clock. For example,
1430 is 2:30pm.
4. Dial 1
(TODAY)
or 2
(DAILY)
to select the alarm type. Dial 0
(NOTSET)
if you choose not to set the alarm.
5. Press the
TRSF
key.
6. Repeat for each alarm if needed.
To cancel any alarms you have set:
1. Press the
TRSF
key and dial 112.
2. Dial the alarm number 1–2 (or 1–3 for DCS systems).
3. Press the
HOLD
key.
To Answer an Alarm
When the alarm rings, you will hear a series of short rings, repeated
three times, and ‘
ALARM REMINDER’
is displayed on the keyset.
•
••
•
Lift the handset to answer the alarm. If you do not, the alarm will
alert you two more times at 5-minute intervals.
Note: You can also select to have a specific reminder message displayed on your
keyset. See Alarm Reminder Messages under Display Features.
Answering the Doorphone
If your extension is programmed to receive calls from a doorphone,
you will hear a series of short rings repeated.
•
••
•
Lift the handset or press the
ANS/RLS
key and you are connected
to the doorphone.
•
••
•
If an electric door lock release is installed, dial 13 to unlock the
door.