Filter
Top Products
42
43
Call Park
Call Park is a feature that allows a user to put a call on hold at one telephone set
and continue the conversation from any other telephone set. Not all service pro-
viders support this feature. Please check with the service provider or IP PBX vendor
for more details.
The “call park” feature is activated by pressing a preprogrammed button or a spe-
cial sequence of buttons. When the conversation which is monitored was trans-
ferred to an unused extension number, users can press this key to retrieve the call.
To assign the key as Call Park via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Voice Mail
When the line key is congured as Voicemail key users can access voicemail
quickly by pressing this key.
To assign the key as Voice Mail via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Prex
When users press a key in which prex function has been set up, the phone will
automatically dial the prex and they will only have to dial the rest of the cor-
respondent number to call out. Prex can only be assigned to the line keys.
To assign the key as Prex via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)
Redial
IIf a key is congured as a Redial key:
• If users press this key in idle status, it will enter the Dialed Calls interface.
• If users press this key in o hook mode, last dialed number will be
dialed immediately.
• If users press this key when there is an active call, the call will be put
on hold and a new call sent to the last dialed number.
To assign Redial to a key via the web interface:
Go to PHONE[FUNCTION Keys (Line Key)