Filter
Top Products
16
17
Reboot
Users should reboot the phone when prompted. The phone may prompt a reboot
after applying specic changes to phone conguration.
To reboot via Web interface:
1) Go to SYSTEM[UPGRADE.
2) Click REBOOT button.
Note: Please do not power o during reboot, or it may cause a ash memory error.
Customizing The Phone
General Settings
Phone Status
Users can view the status of the phone using the phone interface or the web interface.
This option allows users to review:
• IP
• MAC (Machine Access Control) address
• Firmware
• Network: MAC, LAN, Netmask, Gateway, DNS, etc
• Phone: Model, Hardware, Firmware, Product ID and MAC
• Accounts: The status of the 3 SIP accounts
To check the Phone Status via phone interface:
Press the OK button to check the IP, MAC address and Firmware version.
Use the navigation keys to check the other information.
To view the Phone Status via web interface:
Open a web browser and input the IP Address of the phone. Enter login and pass-
word (default login and password are admin and admin).
Select STATUS [HARDWARE STATUS.
Status
1. IP: 192.168.0.120
2. MAC: 30c6be00011a
3: Firmware: 1.0.2683
BACK