Filter
Top Products
Installation
8
The base’s location affects the handset’s range.
If you have a choice of several locations, try each
to see which provides the best performance.
Your telephone connects directly to a modular
telephone line jack. If your telephone wiring does
not have a modular jack, you can update the
wiring yourself using jacks and adapters
(available at your local RadioShack store), or
have the telephone company update the wiring
for you. You must use compatible modular jacks
that are compliant with Part 68 of FCC Rules.
Ô
ON A DESK TOP
1. Plug one end of the
supplied long modular
cord into the
TEL LINE
jack on the back of the
base.
2. Insert the supplied AC
adapter’s barrel plug into
the
DC IN 9V jack on the
back of the base and
route the adapter’s cord
through the hook of the
bracket.
3. Plug the other end of the modular cord into a
modular phone line jack.
4. Plug the adapter into a standard AC outlet.
5. Raise the antenna to a vertical position.
Ô NOTES Ô
• If your home has
specially wired alarm
equipment connected to
the telephone line, be
sure that installing the
system does not disable
your alarm equipment.
If you have questions
about what will disable
alarm equipment,
contact your telephone
company or a qualified
installer.
• The USOC number of
the jack to be installed is
RJ11C (or RJ11W for a
wall plate jack).
CAUTION
You must use a
Class 2 power
source that supplies
9V DC and delivers at least
350 mA. Its center tip must
be set to positive and its plug
must fit the phone’s DC IN
9V jack. The supplied
adapter meets these
specifications. Using an
adapter that does not meet
these specifications could
damage the phone or the
adapter.
!