Memory Dialing
21
To continue to store the telephone number,
proceed to step 7 on “Storing Phone Numbers
and Names” on page 19.
If you make a mistake while entering
a name
Use /TONE/ or #/ to move the cursor to the
incorrect character.
Press
DEL/CH to erase the wrong character.
Then enter the correct character.
To delete all characters, press and hold
DEL/CH.
MAKING CALLS WITH MEMORY
DIALING
Memory Dialing from Standby Mode
1. Press MEM. The handset displays your
programmed memory locations.
2. Press
RING/VOL/+ or RING/VOL/-, or enter the
number (
0 - 9) to select the memory location
you would like to dial.
Ô
3. Press
TALK. ¨Talk¨ and the volume setting
appear on the display. Then the displayed
number is dialed.
Ô
Memory Dialing from Talk Mode
1. Press TALK. ¨Talk¨ and the volume setting
appears.
2. Press
MEM.
3. Press
RING/VOL/+ or RING/VOL/- or enter a
number (
0 - 9) to select the memory location
of the desired phone number. The selected
name is displayed.
Ô
4. The phone number in the memory will be
dialed when the
SELECT key is pressed.
Ô NOTES Ô
Memory Dialing from
Standby Mode
• If you press SELECT
before TALK, you can
confirm the name and
the number stored in the
selected memory
location.
• To exit the memory
function without dialing,
return the handset to the
base. The handset
returns to the standby
mode.
• Whenever you are using
a memory menu screen,
you must press a key
within 30 seconds or the
phone will return to the
standby mode.
Memory Dialing from Talk
Mode
If you select a memory
location that does not have
a stored number, the
phone will not dial.