Filter
Top Products
Memory Dialing
19
•Use
#/ and /TONE/ to move the cursor
to the desired location.
•Use
DEL/CH to delete characters as
needed.
• Press and hold
DEL/CH to delete all the
characters.
• If a name is not required, go to step 6.
6. Press
SELECT. ¨Store Number¨ is displayed.
The cursor flashes indicating that the display
is ready for the number to be entered.
7. Use the number keys to enter the phone
number.
• The phone number cannot exceed 20
digits.
•Use
REDIAL to enter a pause in the dialing
sequence. The display shows a ¨
P¨. Each
pause counts as one digit and represents a
two second delay of time between the
digits.
Ô
•Use DEL/CH to delete digits as needed.
8. Press
SELECT. You will hear a confirmation
tone. Memory storage is complete. For
example, if you store a name and number
into memory location number 1, the display
shows ¨
Memory 1 Stored¨.
After about two seconds, the Select Memory
screen is displayed.
Repeat steps 2 - 8 to store more numbers.
9. Press
MEM to return to the standby mode.
Ô NOTE Ô
The pause feature is useful
for long distance calling,
credit card dialing, or
sequences that require a
pause between digits.