Filter
Top Products
Memory Dialing
23
6. Press
SELECT. The cursor flashes indicating
that the display is ready for the number to be
edited.
7. Use the number key,
/TONE/ , #/ ,
REDIAL or DEL/CH to edit the phone number.
The phone number cannot exceed 20 digits.
If you don’t want to change the phone
number, skip this step.
8. Press
SELECT. If you changed either name or
phone number, a confirmation display shows
up. If it is correct, press
RING/VOL/+ to select
“
Yes” and press SELECT. You hear a
confirmation tone. The memory storage is
complete.
For example, if you store a name and number
into memory location number 1, the display
shows ¨
Memory 1 Stored¨. After about two
seconds, Select Memory screen is displayed.
9. Press
MEM to return to the standby mode.
ERASING A STORED NAME AND
P
HONE NUMBER
1. Press MEM. ¨Select Memory¨ is displayed.
2. Press
RING/VOL/+ or RING/VOL/-, or enter a
number (
0 - 9) to select the memory location
you would like to erase.
3. Press
SELECT.
The screen appears with the memory
location number that you have selected in the
display.
4. Press
SELECT.
5. Press
RING/VOL/- to move the pointer down
to ¨
Delete Memory X¨.
6. Press
SELECT. The confirmation screen
appears.