Filter
Top Products
Operation
17
Changing the Auto Talk and CIDCW
1. When the phone is in standby mode, press
MENU.
2. Use
RING/VOL/+ or RING/VOL/- to move the
pointer to the selection that you would like to
change. Press
SELECT to toggle between
¨
On¨ and ¨Off¨ for Auto Talk and CIDCW.
3. Press MENU and return the handset to the
base unit to complete the setting. The
handset returns to the standby mode.
Entering Your Area Code
If you enter a three-digit area code number in the
Area Code option, your local area code does not
appear in Caller ID messages. Do not program
this option if your calling area requires ten-digit
dialing. When reviewing Caller ID messages, you
will see only the local seven digit number. For
calls received from outside your local area code,
you will see a full ten-digit number.
1. When the phone is in the standby mode,
press
MENU.
2. Press
RING/VOL/- twice to select ¨Area Code¨.
3. Press
SELECT.
4. Use the number keys (0 - 9), or DEL/CH to
enter the three-digit area code.
Ô
5. Press
SELECT. A confirmation tone sounds
and the displayed area code is entered.
6. Press
MENU or return the handset to the
base unit to complete the setting. The
handset returns to the standby mode.
Setting the Language
1. When the phone is in the standby mode,
press
MENU.
Ô NOTE Ô
When the area code has
already been stored in
memory, the stored area
code will be displayed. To
change it, use the DEL/CH
and number keys to enter
the new area code. Then
press SELECT. A
confirmation tone sounds.
To complete the setting,
press MENU or return the
handset to the base unit.