Filter
Top Products
16
Operation
FLASH AND CALL WAITING
If you have “Call Waiting” service and a call
waiting tone sounds while you are on a call,
press
FLASH to accept the waiting call. There is
a short pause. Then you will hear the new caller.
To return to the original caller, press
FLASH
again.
Ô
VOICE MAIL WAITING
I
NDICATOR
If you subscribe to voice mail service, you can
use your cordless telephone to access your
voice mailbox. The
VISUAL RINGER LED light on
the base of your phone flashes whenever you
have messages waiting in your voice mailbox.
You can program your access number to a
memory dial location. (The voice mail service
provider will supply you with the access number.
This number may be simply a phone number.
Refer to the provider’s literature.)
Ô
You may need to occasionally reset the indicator
if it remains On after you have retrieved your
messages. To reset the indicator, press and hold
PAGE for five seconds.
SETTING MENU OPTIONS
There are four setup options available. They are
Auto Talk, CIDCW (Caller ID on Call Waiting),
Area Code and Language.
Auto Talk allows you to answer the phone
without pressing
TALK. If the phone rings when
Auto Talk is On, simply remove the handset from
the base and the phone automatically answers
the call. If the phone rings when Auto Talk is Off,
you must press
TALK to answer the call. Ô
Ô NOTES Ô
Flash and Call Waiting
You must subscribe
through your local
telephone company to
receive Call Waiting
Service.
Voice Mail Waiting Indicator
You must subscribe to
voice mail service from
your telephone company in
order to use this feature.
The voice mail company
will provide you with the
access number.
Setting Menu Options
The Cordless phone
features include Auto Talk
and Auto Standby. Auto
Talk allows you to answer
a call by just removing the
handset from the base so
you don’t have to waste
time pushing buttons. Auto
Standby allows you to
hang up by simply
returning the handset to
the base.