Filter
Top Products
Memory Dialing
22
CHAIN DIALING
The memory locations on the handset are not
limited to phone numbers. You can also store a
group of numbers (up to 20 digits) that you need
to enter once your call connects. This is referred
to as Chain Dialing.
An example of this is a bank account number.
Once you have called your bank, and are
prompted to enter the account number, press
MEM and select the location number where the
special number has been stored. Then press
SELECT.
Store your special number with an identifying
name. (Refer to “Storing Phone Numbers and
Names” on page 18.)
EDITING A STORED NAME AND/
OR PHONE NUMBER
1. Press MEM. ¨Select Memory¨ is displayed.
2. Press
RING/VOL/+ or RING/VOL/-, or enter a
number (
0 - 9) to select the memory location
you would like to edit, and press
SELECT.
3. Press
SELECT. The screen appears with the
memory location number that you have
selected in the display.
4. Press
RING/VOL/+ or RING/VOL/- to select
¨
Edit Memory X¨. Then press SELECT. ¨Store
Name
¨ is displayed. The cursor flashes
indicating that the display is ready for the
name to be edited. When a name has not
been stored, the cursor appears at the
beginning of the second line.
5. Use the number keys,
/TONE/ , #/ , or
DEL/CH to edit the name. (See “Steps for
Entering Names and Special Characters” on
Page 20.) To edit only the phone number,
skip this step.