Filter
Top Products
Operation
15
TONE DIALING SWITCH-OVER
Some telephone companies use equipment that
requires pulse dialing (sometimes referred to as
rotary dialing).
If you need to enter tone dialing digits, you can
switch-over to tone dialing during the call. For
example, entering your bank account number
after you have called your bank.
Ô
Initially make your call with the pulse dialing
mode.
Once your call connects, press the /
TONE/
key. Enter the desired number. These
digits will be sent as tone dialing. Once the call
ends, the tone mode is canceled and pulse
dialing mode resumes.
TRAVELING OUT-OF-RANGE
During a call, as you begin to move your handset
too far from your base unit, noise increases. If
you pass the range limits of the base unit, your
call will terminate within five minute.
SELECTING A DIFFERENT
CHANNEL
If you encounter interference while using your
phone, you can manually change the phone´s
channel for clear operation. This function works
only when the phone is in use. Press
DEL/CH.
¨
Scanning¨ appears on the display, indicating the
phone is changing to another channel.
PAGE
To locate the handset (while it’s off the base),
press
PAGE on the base. The handset beeps for
60 seconds. Paging is canceled when pressing
any handset key or the handset is returned to the
base.
Ô
Ô NOTES Ô
Tone Dialing Switch-over
• The tone feature only
applies when the dial
mode is set to pulse.
• This special number can
be stored in a memory
location. This is referred
to as Chain Dialing (See
page 22.)
Page
You can cancel paging
also by pressing the PAGE
on the base.