Filter
Top Products
Beyond the Basics
86
Setting a Security Code or Personal
Identifi cation Number (PIN)
To play your messages from a remote location,
you will need to enter a two-digit security code or
Personal Identifi cation Number (PIN). The default
security code is 80.
From the base From the handset
Press MENU/CLOCK
twice. The current
security code
appears on the base
and it is announced.
Press
/select or
/select until the
desired number
appears. Press and
hold /select or
/select to quickly
scroll through the
numbers on the
display.
Press SET to select
the security code. A
confi rmation tone
sounds; the system
announces the new
security code.
1.
2.
3.
Press MENU/CLEAR.
Select the ANSW.
SETUP menu, and
then the SECURITY
CODE submenu.
Use the number
keypad (0 through 9)
to enter a two-digit
security code (01-99).
Press SELECT/
.
You will hear a
confi rmation tone.
1.
2.
3.
UP410BH(43-5829)OM.indb 86UP410BH(43-5829)OM.indb 86 1/23/2006 6:32:28 PM1/23/2006 6:32:28 PM