Filter
Top Products
Beyond the Basics
68
To answer a DirectLink call, press /FLASH. (If
Any Key Answer is on you can also press any key
on the twelve-key number pad.) To end the call,
press .
Exiting DirectLink™ Communication
While the handset is using DirectLink communication,
the display shows DIRECTLINK MODE; this means
the handset cannot make or receive normal phone
calls. To exit DirectLink communication and return
to normal standby, simply return the handset to the
cradle, or press MENU/CLEAR followed by SELECT/
. DIRECTLINK MODE CANCEL appears in the
display.
Using the Intercom
You can use the intercom to talk to another station
without using the phone line.
Making an Intercom Page
From the base From the handset
With the phone
in standby, press
HOLD/INTCOM/
XFER.
Press 1 through 4 to
select the handset
you want to talk with
or press */TONE to
page all stations.
1.
2.
With the phone
in standby, press
INTCM/XFER.
Use
or to
select the station
you want to talk
with, then press
SELECT/ . Select
ALL to page all other
stations paged.
1.
2.
3.
UP410BH(43-5829)OM.indb 68UP410BH(43-5829)OM.indb 68 1/23/2006 6:32:19 PM1/23/2006 6:32:19 PM