Filter
Top Products
The Basics
20
Connecting the phone base
Plug one end of
the supplied long
modular cord into
the TEL LINE jack
on the bottom of
the base.
Plug the other end
of the modular
cord into a
modular phone
line jack.
Insert the supplied AC
adapter’s barrel plug
into the DC IN 9V jack
on the bottom of the
base.
Route the adapter’s
cord through the strain
relief slot on the base, then plug the adapter into
a standard AC outlet.
CAUTION: You must use a Class 2 power source
that supplies 9V DC and delivers at least 350 mA
(for the base)/210 mA (for the charger). Its center
tip must be set to positive and its plug must fi t
the phone’s DC IN 9V jack. The supplied adapter
meets these specifi cations. Using an adapter
that does not meet these specifi cations could
damage the phone or the adapter.
1.
2.
3.
4.
TEL LINE
DC IN 9V
DC IN 9V
TEL LINE
TEL LINE
DC IN 9V
DC IN 9V
TEL LINE
UP410BH(43-5829)OM.indb 20UP410BH(43-5829)OM.indb 20 1/23/2006 6:31:44 PM1/23/2006 6:31:44 PM