Filter
Top Products
61
Beyond the Basics
Using Hold, Conference and
Transfer
Placing a Call on Hold
To place a caller on hold, press INTCM/XFER on the
handset or HOLD/INTCOM/XFER on the base. If you
leave a caller on hold for more than ten seconds, the
display will read, LINE ON HOLD.
To return to the party on hold, press
/FLASH or
SPEAKER on a handset or SPEAKER on the base.
NOTES
You can only place a caller on hold for 5
minutes. Once 5 minutes have passed,
the caller will be disconnected and the
phone will return to standby.
While a call is on hold, Caller ID and Call
Waiting can not be received.
•
•
Conferencing
If you have more than one handset, up to four
people can participate in a conference call. A three-
way conference call consists of an outside line and
two stations. A four-way conference call consists
of an outside line, the base speaker phone, and
two handsets. You can easily join a call already in
progress.
From the handset, press
/FLASH or SPEAKER to
join the call. From the base, press SPEAKER. You
can hang up normally; the other station will still be
connected to the call.
UP410BH(43-5829)OM.indb 61UP410BH(43-5829)OM.indb 61 1/23/2006 6:32:15 PM1/23/2006 6:32:15 PM