Filter
Top Products
Beyond the Basics
78
Setting the Day & Time
If you do not set the clock on your answering system,
your messages may not have the correct time and
day stamp. You can set the day and time from the
handset or the base.
From the base From the handset
Press MENU/CLOCK.
Press
/select
or /select until
the correct day
is announced
and the message
counter shows
the corresponding
number (1 for
Sunday, 2 for
Monday, etc.).
Press SET to select
the day.
Press
/select or
/select until you
hear the correct hour
setting. The numbers
1 through 12 appear
on the base as each
hour is announced.
1.
2.
3.
4.
Press MENU/CLEAR.
Move the cursor to
GLOBAL SETUP and
press SELECT/
.
Move the cursor
to DAY & TIME and
press SELECT/
.
Use
and to
select the correct
day, and press
SELECT/ .
Use
and to
select the correct
hour, and press
SELECT/ .
Use
and
to select the
correct number of
minutes, and press
SELECT/ .
1.
2.
3.
4.
5.
6.
UP410BH(43-5829)OM.indb 78UP410BH(43-5829)OM.indb 78 1/23/2006 6:32:24 PM1/23/2006 6:32:24 PM