Filter
Top Products
63
Beyond the Basics
Answering a Transferred Call
When a station receives a call transfer, it sounds a
paging tone; handsets also show the ID of the station
that is paging. To accept the call transfer:
To answer the page and speak to the transferring
station, press
/FLASH or INTCM/XFER on the
handset. On the base, press SPEAKER or HOLD/
INTCOM/XFER.
To accept the call and speak to the caller, press
/FLASH on the handset or SPEAKER on the base.
When you accept the transferred call, the
transferring station will be disconnected.
Only the fi rst station to answer the transfer page will
be connected to the call. If the transfer page is not
picked up within one minute, the operation will be
canceled.
1.
2.
3.
UP410BH(43-5829)OM.indb 63UP410BH(43-5829)OM.indb 63 1/23/2006 6:32:17 PM1/23/2006 6:32:17 PM