Radio Shack 43-5829 Cordless Telephone User Manual


 
45
Beyond the Basics
Programming Base Speed Dial
Numbers
The number keypad base can store 10 speed dial
numbers, 0 to 9. Follow the steps below to store
new speed dial numbers in the base. (Handset speed
dial numbers are stored as part of a phonebook
entry. See Creating Phonebook Entries on page 38
for information on programming handset speed dial
numbers.)
With the phone in standby, press MEMORY.
Use the number keypad to enter the phone
number; the phone number can contain up to 20
digits. If you need the phone to pause between
digits when it’s dialing (for example, to enter an
extension or an access code), press REDIAL/
PAUSE to insert a two-second pause. You can
also use more than one pause together if two
seconds is not long enough. Each pause counts
as one digit.
Press MEMORY again, and then press a number
key (0 to 9) where you want to store this phone
number. You will hear a con rmation tone.
Deleting Base Speed Dial Numbers
With the phone in standby, press MEMORY twice.
Press the number key (0 to 9) that contains the
phone number you want to delete. You will hear a
con rmation tone.
1.
2.
3.
1.
2.
UP410BH(43-5829)OM.indb 45UP410BH(43-5829)OM.indb 45 1/23/2006 6:32:01 PM1/23/2006 6:32:01 PM