Filter
Top Products
109
Beyond the Basics
Appendix: Handset-Base
Registration
When you register the handset with the base, unique
data is written on both the base and the handset. The
handset registered to one base unit cannot be used
with another base unit unless the registration data is
“deregistered” with the original base unit. This means
the handset must be within the range of the original
base unit to de-register. If for any reason the original
base unit is not within the range (or the registration
data in the original base unit is erased), “Out of
Range” error takes place and you cannot de-register
the handset.
Should you encounter this trouble, follow these steps
to deregister the handset.
Press and hold
and #/> for at least 5 seconds.
Move the cursor to select REPLACING BASE and
then press SELECT/
. REPLACE BASE appears.
Move the cursor to select YES, and then press
SELECT/
. You will hear a confi rmation tone,
and the handset deletes its own base information
without contacting the base. The handset
displays MODELS VARY! CHARGE HANDSET ON
THE BASE FOR REGISTRATION OR REFER TO
OWNER’S MANUAL.
Register the handset to the new base (see
Registering Accessory Handsets on page 36).
1.
2.
3.
4.
UP410BH(43-5829)OM.indb 109UP410BH(43-5829)OM.indb 109 1/23/2006 6:32:37 PM1/23/2006 6:32:37 PM