Filter
Top Products
Chapter 2-First Time Installation and Configuration
2-10
Fast Configuration Wizard
1 Enter the required IP information in the dialog box.
2 Click the Next button.
Table 2-2 Fast Configuration Wizard – IP
Field Description
Network Service
Name
The name of the Default IP Service, assigned by the
Fast Configuration Wizard.
Note: This field is displayed in all dialog boxes.
Signaling Host IP
Address
Enter the IP address of the Signaling Host. This is
the address used by endpoints for dialing in to the
MCU.
MPM 1 IP
Address
Enter the IP addresses of the media boards.
Endpoints connect to conferences via these
addresses.
MPM 2 IP
Address
Subnet Mask Enter the subnet mask of the MCU.
Default value: 255.255.255.0.