Filter
Top Products
Polycom RMX 2000 Getting Started Guide
2-9
4 Start the RMX Web Client application on the workstation, by entering
http://<Control Unit IP Address> as defined in the USB key in
the browser’s address line and pressing Enter.
5 In the RMX Welcome Screen, enter the default
Username(POLYCOM)and Password(POLYCOM)and click Login.
The RMX Web Client opens and the Product Activation dialog box
appears with the serial number filled in:
6 Enter the Product Activation Key retrieved earlier (or paste it) and click
OK.
The Fast Configuration Wizard appears.
Procedure 4: Modifying the Default IP Service Settings
The Fast Configuration Wizard enables you to configure the Default IP
Service. It starts automatically whenever one or both of the following
conditions occurs:
• The RMX cannot access the Default IP Service. This happens during
First Time Power-up, before the service has been defined.
•The Default IP Service has been deleted, followed by an RMX reset.