Filter
Top Products
PLANET VIP-150T User’s Manual
4
1.1.2 Back View
♦ DC 9V: DC 9V power input outlet
♦ LAN: RJ-45 connector, connected directly to the Hub through the straight CAT-5
cable.
♦ PC: RJ-45 connector, connected directly to the PC through the straight CAT-5 cable
♦ Line: RJ-11 connector, connected directly to the PSTN analog line.
?
Note:
There are two LED indicated lights: LINK/ACT and 10/100 for LAN port and
PC port. When network
status is regular, LED of LINK/ACT will light on; when
VIP-
150T is transmitting or receiving data, LED will be flashing; when transmit
rate is in 10 mbps or 100mbps, LED of 10/100 will light off or light on.
1.1.3 Specification of connector
1、 Ethernet Port：
Ethernet port is for connecting VIP-150T to network, transmit rate supports 10/100
Base-T.
Ethernet connector（LAN）
2、 RJ11connector：
RJ11 connector is for connecting VIP-150T with PSTN.
RJ11connector