Filter
Top Products
PLANET VIP-150T User’s Manual
34
(GMT-8: ifaddr –timezone -8)
5. -ipsharing: If VIP-150T is behind a IP-sharing , user must enable IP sharing
function and specify public IP address.(ifaddr –ipsharing 0/1 “public IP address
of IP sharing” , 0 for disable and 1 for enable)
?
Note:
Some Proxy servers support endpoint behind NAT function, in this case
VIP-150T doesn’t have
to enable IP sharing function, please contact with your
Proxy Server vendor.
6. –upnp: enable/disable UPnP function. If the IP sharing or NAT device supports
UPnP, user can enable UPnP function so that VIP-150T will automatically connect
with NAT device without configuration in VIP-150T and NAT device.
4.10 [pppoe] command
1. -print: display all current configurations and information.
2. –id: to set PPPoE authentication user name.
3. –pwd: to set PPPoE authentication password.
4. –reboot: Choose enable or disable this function. If user enables this function, after
PPPoE disconnected, VIP-150T will automatically reboot to re-connect, and after
reboot, if VIP-150T still can’t connect with server, VIP-150T will keep trying to
connect. On the other hand, if user disables this function, VIP-150T won’t reboot
and keep trying to connect. (pppoe –reboot 0/1)