Filter
Top Products
PLANET VIP-150T User’s Manual
14
Chapter 3 Configuring the VIP-150T through
Web Pages
The HTTPD web management interface provides user an easier way to configure rather
than command line method through TELNET.
The configuration function and steps are similar with the way through command line. Please
refer to the chapter 4- Configuring the VIP-150T through Telnet command lines for more
detail information. Below is a guide for user to configure via web interface.
Step 1. Browse the IP Address predefined via Keypad
Please enter IP address (user have to set via LCD menu first) of VIP-150T in web browser.
If user failed to set IP address via LCD menu, the default IP address of VIP-150T is
192.168.0.1, user can try to connect to VIP-150T via this default IP via web interface.
Step 2. Input the login name and password
n Login name: root / administrator
n Password (The same with TELNET): Null (just press confirm, no need to key in
password in default value)
?
Note:
User can set password later in 9.PASSWORD via web interface.