Filter
Top Products
PLANET VIP-150T User’s Manual
40
4.17 [ddns] command
1. -print: display DDNS overall information and configuration.
2. -enable: to enable/disable DDNS function.(ddns –enable 0/1, 0 for disable and 1
for enable).
3. -server: to set IP address of DDNS login server.
4. -hostname: to set the registered Domain Name of VIP-150T. (ex.
ddns –test.ddns.org)
5. -id: to set login ID of registered account to log in DDNS server.
6. -passwd: to set password of registered account to log in DDNS server.
7. -checkip: to enable/disable check IP function. If VIP-150T is behind IP sharing,
when this function is enabled, VIP-150T will check it’s public IP address by asking
IP address check server and send to DDNS server to update DDNS data. If this
function is disabled, when VIP-150T is behind IP sharing, it will send it’s private IP
address to DDNS server.
8. -checkipsrv: to set IP address of IP address check server.
9. -delay: to set the update interval time. VIP-150T will re-update it’s IP address in this
time. (ddns –delay 1-59m/1-24h , m means minute, h means hour)
10. -force: to force to execute DDNS update. Once user enter this command ,
VIP-150T will update DDNS data immediately. (ddns –force “IP address of
VIP-150T”)