Filter
Top Products
PLANET VIP-150T User’s Manual
21
3. System Configuration
Please refer to chapter 4.12 [sysconf] command
- Keypad DTMF Type: set DTMF type. User can select DTMF type VIP-150T
transmits.
- RFC2833 Payload Type: change RFC2833 Payload type. This is for special request
from the other site, if RFC2833 payload type of 2 sites are different, it may cause
some problem of connection.
- Interval between Dialstring Digits: Set the DTMF inter digit time (second)
To set the duration (in second) of two pressed digits in dial mode as timed out. If
after the duration user hasn’t pressed next number, VIP-150T will dial out all
number pressed.
- Terminal Digit: select end of dialing key, e.g. set end of dial key as # button, after
finished pressing dialing number then press # will dial out.