Filter
Top Products
Maintenance and troubleshooting
51
The answer
phone has
stopped
automatically.
Answer phone memory
is full.
Delete messages to free sufficient
memory.
The red light is
flashing rapidly.
The answer phone's
maximum memory has
been reached.
Delete messages to free
sufficient memory.
A power failure has
occurred.
Reset date and time (see “3.3
Setting date and time”, page 41).
Remote control
does not work.
You did not enter the
correct code.
Retry (see “Checking messages
remotely”, page 34).
You did not set a remote
control function.
Change the code (see “4.8
Switching remote control on”,
page 44).
The answer phone's
maximum memory has
been reached.
Delete messages to free sufficient
memory.
Problems with the handset
PROBLEM CAUSE SOLUTION
No dial tone.
The handset is out of
range of the base station
(the
A
symbol is not
displayed).
Move closer to the base station
and try again.
The handset has not
been registered to the
base station (the
A
symbol is not
displayed).
Register the handset to the base
station (see “2.7 Registering a
handset to a base station”,
page 40).
The base station is not
properly connected to
the electricity or the
telephone sockets.
Check the connections.
Batteries are low (the
symbol is
displayed).
Charge batteries (see “Installing
or replacing batteries”, page 10).
Zenia 200 Voice base station (continued)
PROBLEM CAUSE SOLUTION
zenia_anglais.book Page 51 Lundi, 28. janvier 2002 2:20 14