Filter
Top Products
System configuration
44
4.5 Modifying the number of rings before answer
You can modify the number of rings (Toll saver, 3, 4, 5) before the answer phone
answers a call.
Go to the "SETTINGS" menu, then to the "Answer" sub-menu, and select
"Rings before answer".
Select the option of your choice from the four possibilities available.
: "Toll saver" is the default configuration for the answer phone.
If you have received a message, the answer phone answers after 3 rings.
If there are no messages, it will answer after 5 rings but you have time to hang
up before it answers the call.
4.6 Activating/deactivating voice prompts
When using the answer phone, voice prompts will provide you with information
about the call before you listen to the messages.
This information includes:
• The number of messages received,
• Date and time,
• Other prompts for using the system.
Go to the "SETTINGS" menu, then to the "Answer phone" sub-menu, and
select "Voice".
Select the option of your choice from the four possibilities available.
4.7 Record quality
With this setting you can specify the record quality for your messages.
Go to the "SETTINGS" menu, then to the "Answer" sub-menu, and select
"Record quality".
Select the option of your choice from the three possibilities available.
: With "standard" quality, there is a recording capacity of about 30 minutes.
With "high quality", the recording capacity is about 10 minutes.
In "automatic" mode, the first five minutes of recording will be in high
quality, and thereafter in standard quality.
4.8 Switching remote control on
If this function is on, you can check your messages remotely via a tone dialling
telephone.
Go to the "SETTINGS" menu, then to the "Answer" sub-menu, and select
"Remote control".
: If this function is switched off, you will not be able to switch your answer
phone on via the telephone network.
zenia_anglais.book Page 44 Lundi, 28. janvier 2002 2:20 14