Filter
Top Products
Using the telephone
13
Making a call from the Zenia 200 Voice base station
Press the key.
The green light starts flashing and you hear the dial tone.
Dial the number using keys to on the keypad.
The number is dialled automatically.
The loudspeaker and the microphone of the base station are switched on
automatically. Speak in the direction of the microphone.
You can adjust the loudspeaker volume using the (increase) or
(decrease) keys.
To hang up, press the key again.
The green light stops flashing.
Answering a call from the handset
When an incoming call is received, the handset rings. The green light and the
t
symbol flash.
: You can stop the handset from ringing without answering the call by pressing
the key. Your base station will continue ringing and the symbol
appears.
: If the network supplies the caller's number, it appears on the screen. Also, the
name is shown if it is stored in one of the phonebooks1.
To answer the call, press the key. The
t
symbol stops flashing.
: You can also press the key to answer the call and switch on the handset
loudspeaker simultaneously.
To hang up, press the key again.
1 Caller identification is subject to network selection.
RINGING
SILENCE
RINGING
01712345678
SILENCE
RINGING
SMITH
01712345678
SILENCE
zenia_anglais.book Page 13 Lundi, 28. janvier 2002 2:20 14