Philips TD6626/BE Telephone User Manual


 
System configuration
46
5.4 Selecting flash time
You may need to change this when connected to a PABX.
Go to the "SETTINGS" menu, then to the "Line settings" sub-menu, and select
"Recall type".
Select one of the two options "Short flash" or "Long flash".
5.6 Displaying/deleting total time for your calls
Go to the "SETTINGS" menu, then to the "Line settings" sub-menu, and select
"View total time".
You can reset the total time of your calls by pressing the key.
The window that is displayed indicates the total time of the calls you have made
since this function was last reset.
: When a call is over, before the handset reverts to "standby mode", you can
also access this function by pressing the key.
5.7 Switching music on hold on/off
Go to the "SETTINGS" menu, then to the "Line settings" sub-menu, and select
"Music on hold", in order to activate or deactivate this function.
5.8 Inserting a pause between digits
If this function is on, a pause can be integrated automatically after the first digit of
the number.
Go to the "SETTINGS" menu, then to the "Line settings" sub-menu, and select
"Pause insertion".
5.9 Automatically inserting a prefix
When this function is on, a prefix can be inserted automatically.
Go to the "SETTINGS" menu, then to the "Line settings" sub-menu, and select
"Automatic prefix".
5.0 Setting up prefix
Go to the "SETTINGS" menu, then to the "Line settings" sub-menu, and select
"Prefixes setup".
Enter the prefix, then validate by pressing the key.
: The prefix will be transmitted each time the number is dialled; therefore, you
must be sure that it is in line with your needs.
zenia_anglais.book Page 46 Lundi, 28. janvier 2002 2:20 14