Filter
Top Products
IP 300 User Manual
48
set password XXXX
Set password of the IP-300 IP phone. XXX must be ASCII characters
and no longer than 7 characters.
set debug X
Set open debugging message output grade for special tool. X is ranged
from 0 through 5: 0: close debugging output; 1: output the operation
information to the window; 2: output all the bug information and data in
test window; 3: save
the bug information into SDRAM; 4: disable checks
the mark.
set upgradeaddr XXX.XXX.XXX.XXX
Set IP address or domain name of FTP server supplying upgraded
program of IP-300 IP phone.
set ntsip XXX.XXX.XXX.XXX
Set IP address of time server.
set daylight X
Set use daylight or not. X ranged from 0 through 1: 0: do not use daylight;
1: use daylight.
set timezone XX
Set time zone.
Command store
Syntax description: no keyword. Parameter ranged from 0 through 4.
Usage: Save the current settings to the designated position.
Relevant Usage: store 1
Command load
Syntax description: no keyword. Parameter ranged from 0 through 4.