Filter
Top Products
IP 300 User Manual
43
set rtpport XXXX
RTP port is the port transferring and receiving voice flow using UDP
protocol. XXXX is ranged from 1024 through 65535.
Jitter size:X
Setting RTP date stream anti-buffer size. The specific value ranges
0-32.The unit is Tone Frame number. (The value is bigger, the tone
frame number is much more in the buffer area and the time-lapse is
longer all ordingly.)
set calltype X
Set call type of the phone. X is ranged from 0 through 2: 0: call out in
normal way; 1: call out in faststart way; 2: call out in faststart and
tunneling way. It is a recommended way with H323 protocol used.
set localtype X
With H323 protocol used, this command used to set how IP phone log in
gatekeeper. X is ranged from 0 through 2: 0: use phone number as
E.164 and H323 ID to login the GK; 1: use phone number as E.164 and
designated H323 ID by set account XXX command; 2: H235 account,
with encryption being supported by GK, set value as 2.
set dtmf X
Set DTMF relay type. X is ranged form 0 through 3: 0:control string
1:inband audio 2: signal keypad 3:rfc 2833.
set dialplan X
Enable/disable dial plan and dial number. Parameter X ranged from 0