Filter
Top Products
IP 300 User Manual
40
protocol used according to requirement of system; 5: use this value with
vida private system used; 6: aivgr use this value with aivgr private
system used.
set serviceaddr XXXX
According to protocol used, set IP address or domain name of log in
server. With H323 protocol used, set IP address or domain name of
gatekeeper; With MGCP protocol used, set IP address or domain name
of Call Agent; With SIP protocol used, set IP address or domain name of
SIP Proxy Server; With Net2phone protocol used, set IP address or
domain name of designated server.
Note With H323 protocol used, if value of set service is 0, then set serviceaddr
command can be used to set IP address of gateway.
set serviceid XXXXX
Set service ID according to required by service system.
set nattraversal X
Set use proxy or not. X ranged from 0 through 6: 0: do not use proxy.
When the log in server and IP phone in the same LAN, or the log in
system supports the IP phone working behind the LAN; 1: Use proxy.
When the login system does not support IP phone working behind the
LAN, please use this value to search public IP address of the NAT
device. With this item selected, please make port mapping on NAT
device; 2: With Citron private protocol used, use this value to fit into the
GnuGK system transferring the voice and signal by router; 3: use this