Filter
Top Products
IP 300 User Manual
28
Note To modify the parameters of backup settings, please use Telnet commands.
local prefix: With enable or switch selected in innerline dropdown list, please
fill the number switching to backup setting 1 here, such as 56.
nonlocal prefix: With enable or switch selected in innerline dropdown list,
please fill the number switching to backup setting 2 here, such as 57.
answer:
Enter a number from 0 through 60 to set the entries of the seconds
before the phone answer the call auto or forward the calls. To disable auto
answer function, please set this parameter as 0.
ring type:
Set ring type by selecting corresponding item from drop down list.
dtmf 0-9: Set ring as ordinary rings in different frequency
not disturb
: Set the phone do not ring by selecting this item.
pcmring: Set ring as music shipped from factory by selecting this item.
user define
Set ring as music saved by user by selecting this item.
use digitmap: Enable/disable digitmap by checking/unchecking the box.
answer:
Enter a number from 0 through 60 to set the entries of the seconds
before the phone answer the call auto or forward the calls. To disable auto
answer function, please set this parameter as 0.
fwd number: Enter receiving forwarded calls phone number into this field; If the
IP phone used with modem, with modem item selected in iptype list box, and
then fill ISP number into this field.
fwd poweroff: Forward calls if power off by checking this box. Please enter