Filter
Top Products
IP 300 User Manual
36
registerport 1719 signalport 3102 controlport 3022
account hk016
phonenumber 6022 fwdpoweroff 0[disable]
fwdalways 0[disable] fwdbusy 0[disable] fwdnoanswer 0[disable]
ringtype 12[user define] answer 30
password 1234
upgradeaddr [empty]
sntpip 210.59.157.10 daylight 0[disable]
timezone 55[(GMT+08:00)Beijing,Hong Kong,Urumqi]
P:\>
Note The “V1.38” is the version number of the firmware for IP300, it could be different
from the firmware version displaying on your phone. It is subject to renewal from
time to time. For the latest version, please consult your service provider.
Command set
Syntax description: set keywords value
Usage: Used to configure password and other running parameters of IP300 IP
phone.
Detailed description:
set iptype X
Set how IP phone gets relevant network parameters. X ranged from 0
through 3: 0: authorize users set IP address, subnet mask and router IP
address of IP phone manually; 1: use DHCP mode. With this system,
your LAN or router automatically assigns all the required network
parameters to any device connected to it when the device log on. IP-300
IP phone is shipped from the factory with DHCP on. So, if your LAN or