Filter
Top Products
IP 300 User Manual
16
B
. Using the Web Browser to configure the IP phone
The following diagram imitates a simple network layout in which the PC and IP300
connect to the internet through a router.
Router (connected to
Internet on the other side)
IP address:
192.168.1.254
Your PC (on which you
configure your IP300)
IP address:
192.168.1.101
IP300 internet phone
IP address:
192.168.1.100
On a PC connecting with the phone or at the same segment of the phone as the
above diagram shows (make sure that your PC and the IP phone are on the same
network and are assigned an IP address), double click icon to open the IE
browser. Input the IP address of the phone into address bar
( ), and then input password of the phone into the
following page. Default password 1234 is ordinary password. Then
click button. The following configured page (on page 13) will popup.
Input the data by your computer’s keyboard according to your LAN parameters
under the “network settings” , “protocol settings” , “phone settings” and “audio
settings”. When finished, click “update” and quit the screen.