Filter
Top Products
IP 300 User Manual
37
router is configured to use DHCP addressing, the IP phone’s LAN
parameters will automatically be configured as soon as it is connected to
the LAN or router and powered up; 2: use PPPoE mode. Those ADSL
and Cable Modem users please select this item for it is a protocol
especially designed for them. With this system, ADSL ISP automatically
assigns all the required IP parameters to any device connected to it
when the device log on; 3: use modem mode. Those who use IP phone
with modem, please set the value as 3.
set pppid XXX
With iptype set as 2, use this command to set ADSL ID; with iptype set
as 3, use this command to set Modem ID.
set ppppin XXX
With iptype set as 2, use this command to set ADSL pin; with iptype set
as 3, use this command to set Modem pin.
set ip XXX.XXX.XXX.XXX
With iptype set as 0, use this command to set IP address of IP-300 IP
phone.
set subnetmask XXX.XXX.XXX.XXX
With iptype set as 0, use this command to set subnet mask of IP-300 IP
phone.
set router XXX.XXX.XXX.XXX
With iptype set as 0, use this command to set router IP of network with