Filter
Top Products
IP 300 User Manual
38
IP-300 IP phone.
set dns XXX.XXX.XXX.XXX
With iptype set as 0, use this command to set IP address of DNS server.
set dns2 XXX.XXX.XXX.XXX
With iptype set as 0, use this command to set IP of backup DNS server.
set mac XX-XX-XX-XX-XX-XX
Set MAC address of the IP-300 IP phone. Parameter xx-xx-xx-xx-xx-xx
must be an HEX number.
set protocol X
Set protocol of the IP-300 IP phone. Parameter X ranged from 0 through
5: 0 – H323 protocol; 1 -- Sip protocol; 2 -- Mgcp protocol; 3- Net2phone
private service,4-iax 5-wp.
set service X
According to different protocol, set use protocol service or not. X ranged
from 0 through 1. 0: do not use service; 1: use service.
set service type X
Enable/disable the repaid and service system .choose the repaid server
provider. Parameter x ranged from 0 through 29: 0: disable repaid card;
1: use Mediaring service; 2: use eTalk card; 3: use Auvtech system; 4:
use UTstarcom service; 5: use Ringtec service; 6: use Smartcon service;
7: use dda service; 8: use vida service; 9: use citron system; 10: use
asiasoft system; 11: use uptech system; 12: use zte system; 13: use