Filter
Top Products
IP 300 User Manual
20
Note With Net2phone selected here, please set other necessary parameters: check
use service
option, and then fill IP address or domain name of designated
server into service addr field; then set service port as 6801; fill account and
password of Net2phone card into account and pin fields.
use service: Enable/disable service by checking/clearing this box.
With H.323 protocol selected, service refers to the gatekeeper. To make
calls through gatekeeper, please check this box; otherwise, phone can only
make IP-to IP calls or calls through gateway.
With MGCP protocol selected, service refers to Call Agent. Always check
this box since there is no way to make calls without a Call Agent.
With SIP protocol selected, service refers to SIP Proxy Server. To make
calls through gatekeeper, please check this box; otherwise, phone can only
make IP-to IP calls.
With Net2phone protocol selected, service refers to Net2phone designated
server. Always check this box to use Net2phone’s service.
Note Designated Net2phone server IP address are: 216.53.3.52; 4.43.114.39;
4.43.114.38 or 05.228.245.8. Domain names are: call1.net2phone.com;
call2.net2phone.com; skip1.net2phone.com; skip2.net2phone.com;
skip1.f8g9h0.net or skip2.f8g9h0.net.
service type: This option is used to accommodate the miscellaneous
requirements of the system providers. When IP phone is connected to these
systems, please select the corresponding service type.
register ttl : With H323 or SIP protocol, IP phone will send a keep-alive
registration message to H323 gatekeeper or SIP proxy server every “register
ttl
” seconds. The minimum value is 10, maximum value is 255. Default is 60.
Common: no special requirements
Mediaring: use Mediaring prepaid card
Etalk: use etalk prepaid card. When this is selected, please select