Filter
Top Products
1.2 Receiving Group Features
Feature Guide 55
• If an ICD Group button is assigned, it also shows the log-in/log-out status of the
corresponding group. The light pattern is the same as the Log-in/Log-out button which
includes the group number.
• Wrap-up Button
A flexible button can be customised as the Wrap-up button. It shows the current status as
follows:
• When a PS in Wireless XDP Parallel Mode completes a call, neither the PS nor its wired
telephone can have Wrap-up time. ( 1.24.5 Wireless XDP Parallel Mode)
• Automatic Log-out
A member extension may be logged-out automatically, if the Unanswered time expires a
preprogrammed number of times consecutively. The number of consecutive unanswered
calls can be assigned for each incoming call distribution group. If the extension is a
member of more than one incoming call distribution group, the unanswered number is
counted across all corresponding incoming call distribution groups. It is possible to return
to the log-in mode manually.
Automatic Log-out feature does not work for the extension in an incoming call distribution
group in Ring distribution method ( 1.2.2.2 Group Call Distribution).
• Log-in/Log-out Monitor
The supervisor extension can monitor and control the log-in/log-out status of the incoming
call distribution group members. ( 1.2.2.7 Supervisory Feature)
• Log-in/Log-out Information on SMDR
Log-in/Log-out information can be printed out on SMDR. ( 1.25.1 Station Message
Detail Recording (SMDR))
Feature Guide References
1.19.2 Flexible Buttons
User Manual References
User Manual
1.8.1 Leaving an Incoming Call Distribution Group (Log-in/Log-out, Wrap-up)
Floating extension
number of a
specified incoming
call distribution
group
Used to log-in or log-out from the
specified incoming call distribution group.
Log-out
Status
Log-in
Status
(All)
Used to log-in or log-out from all incoming
call distribution groups to which you
belong.
After Log-
out
Operation
After Log-
in
Operation
Light pattern Status
Slow red flashing Wrap-up
Red on Not Ready
Off Ready (Wrap-up mode cancel)
Parameter Usage
Light Pattern
Red on Off