Filter
Top Products
3.2 PC Programming
Feature Guide 321
3. Type the Installer Level Programmer Code
(default: 1234), then click [OK].
The Programmer Code authorises different
programming levels, and the Quick Setup is
only available when you start the
Maintenance Console with the Installer Level
Programmer Code.
Note
There are 2 other Programmer Codes
with limited authorisation: Administrator
Level (default: 1111), and User Level
(default: none).
4. Click "Connect" "USB" from the menu bar.
5. Type the system password for installer
(default: 1234), then click [OK] to log-in.