Filter
Top Products
1.24 Portable Station (PS) Features
Feature Guide 223
basis through system programming: Called Party’s Name/Number or Caller’s Name/
Number.
• Calling Multiple PSs Simultaneously
There are two methods to call multiple PSs simultaneously using the floating extension
number assigned to the following groups:
• When a PS joins a PS ring group, the following personal settings are disregarded:
a) When the PS ring group is called:
b) Log-in/log-out setting (from the PS ring group/from the incoming call distribution
group which the PS ring group belongs to). ( 1.2.2.6 Log-in/Log-out)
Note
Log-in/log-out setting of the PS ring group from the incoming call distribution group is
also disregarded.
Method Assignment Merit Demerit Details in
Incoming
Call
Distribution
Group
Assign all desired
PSs to one incoming
call distribution group
( Incoming Call
Distribution Group
Member [620]), and
set the group call
distribution method
for the group to
"Ring".
All PS users in the
group can use the
Log-in/Log-out
feature, Wrap-up
feature, and ICD
Group button for
the group.
The CS may often
be busy as each
PS in the group
uses one channel
when a call
arrives at the
group.
• 1.2.2
Incoming
Call
Distribution
Group
Features
PS Ring
Group
Assign all desired
PSs to one PS ring
group.
Only one channel
is used when a
call arrives at the
group.
PS users in the
group cannot use
the Log-in/Log-
out and Wrap-up
features.
–
– Delayed Ringing
– Display information when the incoming calls arrive;
The settings (e.g., display priority) are disregarded.
– The setting which is assigned on the PS (e.g., FWD)
– The status of the PS (e.g., busy)
PS Ring Group
Log-out
Log-in