Filter
Top Products
70
Problem
You cannot register the
handset at the base unit.
“Recharge” is displayed,
“”
flashes or the
handset beeps intermittently.
“Charge for 15h” is
displayed and the handset
does not work.
You charged the battery
fully, but “Recharge” is still
displayed and/or “ ”
continues to flash, or
“Charge for 15h” is
displayed.
The CHARGE indicator
light does not go out after
the battery has been
charged.
If you cannot solve your
problem
Cause & Remedy
•Charge the battery fully (p. 10).
•The maximum of 3 handsets have already
been registered to the base unit.
•
This base unit has the memory of the handset
currently registered to another base unit.
Erase the handset memory from the base unit.
For KX-TG2382B/KX-TG2382PW/
KX-TG2383S base unit:
(1)
Press and hold
HANDSET LOCATOR/INTERCOM (ALL)
until the CHARGE indicator flashes.
(2) Press and hold
HANDSET LOCATOR/INTERCOM ((1) to (3))
of the handset number that you want to
erase until the CHARGE indicator flashes,
then rapidly flashes, then goes out.
•Charge the battery fully (p. 10, 11).
•The battery has been discharged. Charge the
battery fully (p. 10, 11).
•Clean the charge contacts and charge again
(p. 11).
•Install a new battery (p. 61).
•This is normal.
•Call our customer call center at
1-800-211-PANA(7262).
•Panasonic’s e-mail address for customer
inquiries:
consumerproducts@panasonic.com
for customers in the USA or Puerto Rico
ONLY
Troubleshooting