Filter
Top Products
61
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Battery Replacement
If “Recharge” is displayed and/or “ ” flashes after a few telephone
calls even if the battery was fully charged, replace the battery with a new
Panasonic N4HHGMB00001 or N4HHGMB00005 (HHR-P103) battery. To
order, call the accessories telephone number on page 2.
1
Press the notch on the
handset cover firmly and
slide it as indicated by the
arrow.
2
Remove the old battery and
wait for a few minutes.
And insert the new battery
into the handset as shown,
matching the correct
polarity (#). Press
the battery down until
it fits securely into the
compartment ($).
3
Close the cover. Make sure the handset display shows “ ”,
when you place the handset on the base unit or the charger.
•If it does not show “ ”, remove the new battery and wait for 10
minutes; and then insert the battery again. Make sure the handset display
shows “ ”.
4
Charge the new battery for about 15 hours in order to display the
battery strength prompt correctly (p. 10, 11).
1
2
A nickel metal hydride battery that is recyclable powers the
product you have purchased. Please call 1-800-8-BATTERY
for information on how to recycle this battery.